Noroo 2K Epoxy Floor Paint & Primer Grey Kit 52L - Covers Approx. 200 m²

Noroo 52L 2K Epoxy Floor Paint & Primer kit for Approximately 200 m². Noroo Epoxy Floor Paint System provides a primer, a topcoat and a thinner required to coat approximately 200 m² of concrete flooring

This complete system includes a clear penetrating epoxy primer and a durable grey epoxy topcoat, providing excellent adhesion, abrasion resistance and a glossy, dustproof finish.

Key Includes - 52L Total

• 1 × Noroo DNY-200 Clear Epoxy Primer Kit – 16L
  • 10.67L Primer Base
  • 5.33L Hardener
• 2 × Noroo Cleanpoxy 3100 Dark Grey Topcoat Kits – 16L each
  • 10.67L Topcoat
  • 5.33L Hardener
• 1 × Noroo Epoxy Thinner DR-100 4L

Key Features

• Complete primer and topcoat system
• Covers approximately 200 m²
• Excellent adhesion to concrete
• Excellent abrasion resistance
• Water and chemical resistant
• Durable dustproof finish
• Glossy dark grey topcoat
• Suitable for interior concrete floors

Suitable For

• Automotive workshops
• Warehouses
• Garages
• Factories
• Commercial and industrial concrete floors
• Interior areas requiring a durable, dustproof finish

Mixing & Application

• DNY-200 Clear Epoxy Primer
  • Mixing ratio= 2:1 (Base : Hardener)
  • No thinner required
  • Apply by roller after mixing
    
• Cleanpoxy 3100 Grey Topcoat
  • Mixing ratio= 2:1 (Base : Hardener)
  • Apply by roller or brush
  • Dilute by less than 5% only if required
    

Recommended Coating System

• Apply DNY-200 Penetrating Epoxy Primer
• Allow the primer to cure as directed
• Apply Cleanpoxy 3100 Grey Topcoat
  
• The concrete surface must be fully cured, clean, dry and free from dust, oil and other contaminants before application.
• Recommended application conditions: 5-35°C with relative humidity below 80%.

* Coverage is approximate and may vary depending on surface condition, porosity, application method and film thickness.